Error running OpenseesSP using ibrun

This forum is for issues related to parallel processing
and OpenSees using the new interpreters OpenSeesSP and OpenSeesMP

Moderator: selimgunay

Post Reply
ajamthe
Posts: 2
Joined: Tue Mar 06, 2018 12:42 pm

Error running OpenseesSP using ibrun

Post by ajamthe »

I am trying to run the OpenseesSP application with following input script MRF4T11.tcl Getting following error:

StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
StaticDomainDecompositionAnalysis::recvSelf - failed to get the Solver
Fatal error in MPI_Recv: Message truncated, error stack:
MPI_Recv(224).....................: MPI_Recv(buf=0x36d9450, count=4, MPI_INT, src=0, tag=0, MPI_COMM_WORLD, status=0x7ffe83d52360) failed
MPIDI_CH3U_Receive_data_found(131): Message from rank 0 and tag 0 truncated; 24 bytes received but buffer size is 16

Any suggestions will be deeply appreciated. Thanks.
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: Error running OpenseesSP using ibrun

Post by fmk »

use system Mumps
Post Reply