Hi all
I use the commond "recorder Node -file $dataDir/P2Tdisp.txt -time -node 65 -dof 1 2 disp;" to get the node displacement. the result should be displayed in the form of 3 column, but at some time point, there will be 4 or 5 column as follow：
13.135 0.0648855 -0.0108434
13.14 0.0648572 -0.0108475
13.145 0.0648289 -0.0108517
13.15 0.0648006 -0.6 -0.00904795
12.55 0.053811 -0.00905377
12.555 0.0538352 -0.00905958
12.56 0.0538593 -0.00906539
12.565 0.0538833 -0.009075 0.0646584 -0.0108763
13.18 0.0646299 -0.0108804
13.185 0.0646013 -0.0108844
13.19 0.0645727 -0.0108885
13.195 0.064544 -0.0108926
13.2 0.0645153 -0.0108967
13.205 0.0644866 -0.0109008
13.21 0.0644579 -0.0109048
.......
47.57 -0.133132 9.21341e-005
47.575 -0.07
47.045 -0.101456 -0.0386948
47.05 -0.100815 -0.038515
47.055 -0.100153 -0.0383196
47.06 -0.0994688 -0.03 -0.135275 0.00167142
Could someone tell me why dose it happen? Thanks very much.
Some wrong with the result
Moderators: silvia, selimgunay, Moderators
-
confidentyou
- Posts: 8
- Joined: Wed Jun 23, 2010 12:25 am
- Location: Southwest Jiaotong University
-
selimgunay
- Posts: 916
- Joined: Mon Sep 09, 2013 8:50 pm
- Location: University of California, Berkeley
Re: Some wrong with the result
It should not happen. It could be due to a problem with your text editor. Please shear the output file itself if possible.
-
confidentyou
- Posts: 8
- Joined: Wed Jun 23, 2010 12:25 am
- Location: Southwest Jiaotong University
Re: Some wrong with the result
selimgunay wrote:
> It should not happen. It could be due to a problem with your text editor.
> Please shear the output file itself if possible.
Hi selimgunay
Thanks for your reply. The text editor I used is the notepad come with the win10 system.
Could you tell me how to shear the output file in this forum? Thanks.
> It should not happen. It could be due to a problem with your text editor.
> Please shear the output file itself if possible.
Hi selimgunay
Thanks for your reply. The text editor I used is the notepad come with the win10 system.
Could you tell me how to shear the output file in this forum? Thanks.
BJUT
-
selimgunay
- Posts: 916
- Joined: Mon Sep 09, 2013 8:50 pm
- Location: University of California, Berkeley
Re: Some wrong with the result
You can upload to a dropbox or google drive folder.
-
confidentyou
- Posts: 8
- Joined: Wed Jun 23, 2010 12:25 am
- Location: Southwest Jiaotong University
Re: Some wrong with the result
selimgunay wrote:
> You can upload to a dropbox or google drive folder.
Hi selimgunay
Thank you very much.
This is the link of the output file: https://drive.google.com/open?id=0B1yfa ... 3ZPR0NYNGs.
Please help me to check this problem. Look forward to your reply.
> You can upload to a dropbox or google drive folder.
Hi selimgunay
Thank you very much.
This is the link of the output file: https://drive.google.com/open?id=0B1yfa ... 3ZPR0NYNGs.
Please help me to check this problem. Look forward to your reply.
BJUT
-
selimgunay
- Posts: 916
- Joined: Mon Sep 09, 2013 8:50 pm
- Location: University of California, Berkeley
Re: Some wrong with the result
Yes, I also see the four columns in some of the rows, however the time step also looks like a bit messed up. Numbers are not always increasing. Are you sure that this is the file that you get directly as a result of the analysis without any modifications? Maybe you can also upload your tcl files in the google drive.