Search found 23 matches
- Thu Apr 21, 2022 2:04 pm
- Forum: OpenSees.exe Users
- Topic: How to remove warning when using uniaxialMaterial BoucWen?
- Replies: 0
- Views: 12166
How to remove warning when using uniaxialMaterial BoucWen?
Hello, everyone, I am using the uniaxialMaterial BoucWen to simulate the material degradation, but when I was doing the static analysis, I saw the following warning in the calculation, anyone knows how to solve it? Thanks. WARNING: BoucWenMaterial::setTrialStrain() -- did not find the root z_{i+1}, ...
- Fri Mar 25, 2022 3:02 pm
- Forum: OpenSees.exe Users
- Topic: Stress-strain model for the steel material that can consider the stiffness degradation and strength degradation?
- Replies: 2
- Views: 2153
Re: Stress-strain model for the steel material that can consider the stiffness degradation and strength degradation?
HystereticMaterial is often used for steel to capture stiffness and strength degradation. There should be many examples online. Thanks a lot for your reply. HystereticMaterial is very useful to model the stiffness and strength degradation. But I don't know how the following parameters influence the...
- Sat Mar 19, 2022 8:58 am
- Forum: OpenSees.exe Users
- Topic: Stress-strain model for the steel material that can consider the stiffness degradation and strength degradation?
- Replies: 2
- Views: 2153
Stress-strain model for the steel material that can consider the stiffness degradation and strength degradation?
Hello, everyone, I am looking for a stress-strain model for the steel material that can consider the stiffness degradation and strength degradation and also this material model can be used in the fiber section. Are there any recommendations for it and which one is the best option for the steel mater...
- Sun Jan 30, 2022 11:04 am
- Forum: OpenSees.exe Users
- Topic: Question about linear static analysis in OpenSees
- Replies: 0
- Views: 11283
Question about linear static analysis in OpenSees
Hello, everyone, I have a question about using the following codes to do linear static analysis in OpenSees. The model is linear elastic and if static load of magnitude 5e6 is applied to the model, the output of target displacement is 300mm. For the load vector, staticload, in the following code: If...
- Sat Nov 28, 2020 7:18 pm
- Forum: OpenSees.exe Users
- Topic: Simple fixed beam question
- Replies: 3
- Views: 2686
Re: Simple fixed beam question
Thanks, it is very helpful.Ashok wrote: ↑Sat Nov 28, 2020 5:47 pm Hi,
I am not sure about STKO, but see if this helps.
https://portwooddigital.com/2020/08/27/ ... -marplots/
This is a article written by Prof. Scott.
- Sat Nov 28, 2020 12:47 pm
- Forum: OpenSees.exe Users
- Topic: Simple fixed beam question
- Replies: 3
- Views: 2686
Simple fixed beam question
I am trying to STKO's new diagram plot feature, so I just built a fixed beam to test the results. But when I fix all DOFs of node 1 and node 2, the OpenSees can not output any results. Does anyone know how to deal with it?
fix 1 1 1 1 1 1 1;
fix 2 1 1 1 1 1 1;
fix 1 1 1 1 1 1 1;
fix 2 1 1 1 1 1 1;
- Fri Nov 06, 2020 7:58 pm
- Forum: OpenSees.exe Users
- Topic: How to deternmine the parameters in Elastomeric Bearing Element?
- Replies: 0
- Views: 5416
How to deternmine the parameters in Elastomeric Bearing Element?
https://opensees.berkeley.edu/wiki/index.php/File:ElastomericBearingBoucWenFig01.png https://opensees.berkeley.edu/wiki/index.php/File:ElastomericBearingBoucWenFig01.png Hello, everyone, For the bearing element in the link, there is a relation between Fy-dy, anyone knows any references about how to...
- Wed Aug 26, 2020 7:32 am
- Forum: OpenSees.exe Users
- Topic: Damping issues when doing transient analysis
- Replies: 6
- Views: 4017
Re: Damping issues when doing transient analysis
Just tried FullGeneral, no WARNING. But it is really time-consuming.
- Wed Aug 26, 2020 7:02 am
- Forum: OpenSees.exe Users
- Topic: How many windows can you open from a single OpenSees.exe?
- Replies: 4
- Views: 3076
Re: How many windows can you open from a single OpenSees.exe?
For the output files, I designate them to different directories for each analysis.
- Wed Aug 26, 2020 6:48 am
- Forum: OpenSees.exe Users
- Topic: How many windows can you open from a single OpenSees.exe?
- Replies: 4
- Views: 3076
Re: How many windows can you open from a single OpenSees.exe?
There are some procedures shared by different analysis, which will be used by the two windows at the same time, I don't know if this will affect the results. Thanks.
- Wed Aug 26, 2020 6:46 am
- Forum: OpenSees.exe Users
- Topic: Damping issues when doing transient analysis
- Replies: 6
- Views: 4017
Re: Damping issues when doing transient analysis
dispBeamColumn needs more elements to make the results accurate enough, and FullGeneral costs more time, are there any better solutions for it? Thanks.
- Tue Aug 25, 2020 10:24 pm
- Forum: OpenSees.exe Users
- Topic: Damping issues when doing transient analysis
- Replies: 6
- Views: 4017
Damping issues when doing transient analysis
Hello, everyone, As described in the code below, before the transient analysis, the static analysis was carried out, the problem is when using rayleigh damping, everything goes well with the settings in the codes, but when switched to modal damping, the following WARNING will appear, WARNING - Force...
- Tue Aug 25, 2020 2:27 pm
- Forum: OpenSees.exe Users
- Topic: How many windows can you open from a single OpenSees.exe?
- Replies: 4
- Views: 3076
How many windows can you open from a single OpenSees.exe?
Hello, everyone, For the parametric study, I need to run two OpenSees windows to use most of the computer memory. I am wondering if it works when the two OpenSees windows are from the exact same one OpenSees.exe in the computer (say just double-click the OpenSees.exe twice and then there will be two...
- Mon Aug 24, 2020 7:07 pm
- Forum: OpenSees.exe Users
- Topic: Aggregator command to add the Shear force-deformation
- Replies: 10
- Views: 5733
Re: Aggregator command to add the Shear force-deformation
Awesome, many thanks.selimgunay wrote: ↑Mon Aug 24, 2020 3:36 pm You can find a derivation and some references here:
http://citeseerx.ist.psu.edu/viewdoc/do ... 1&type=pdf
- Mon Aug 24, 2020 3:15 pm
- Forum: OpenSees.exe Users
- Topic: Aggregator command to add the Shear force-deformation
- Replies: 10
- Views: 5733
Re: Aggregator command to add the Shear force-deformation
Fy is the shear capacity and in a bilinear model that you use, it corresponds to the yield force. A is shear area which is equal to 5/6 of the total area for rectangular sections and 9/10 of the total area for circular sections Brilliant, for the shear area, I am trying to find some references wher...